In shorter succession I like to announce the availability of the latest video in the Electrolysis series. I have wound the autotransformer new and run the tests again. I also changed the electrodes for better visibility of the gas production. With a larger primary coil, the power consumption is also lower but is the gas production and efficiency higher. Find
I like to announce the availability of the latest video in the Electrolysis series. I replaced the Class C amplifier with my Pull – Pull design and added two separate autotransformers from the amplifier to the load. The power delivery is much improved. Next need to be to translate that into gas production by developing the perfect load for gas
I like to announce the availability of the latest video in the electrolysis series. I applied the settings from the simulation and could match what the simulation provided. To understand what is really going on we need to see the alignment of voltage to current. We measure the production of gas as bubble released in time. I start with 3
I like to announce the availability of the latest video in the Electrolysis series. Because we have no bearing on frequency and resonance we must calculate and simulate. That is the process we always must follow to find a working frequency. This is one of the examples where we better do some simulation before we built. We use one frequency
I like to announce the availability of the latest video in the Electrolysis series. Due to health-related issues of my family and myself with only very limited capacity. In this video I demonstrate that the calculation for an effective resonance to generate hydrogen is very difficult. The statement from Stanley Meyer you can use any kind of water including seawater
I like to announce the availability of the latest video in the electrolysis series. I could get stainless steel 316l cut as electrodes for the resonant water splitting process. I test in this video only with two plates. I have 10 together I will test in the upcoming video. Comparing the industrial standard of 5 KWh of power consumption to
While I must wait for components and equipment to arrive, I started a new subject which is derived from the LENRs project, Electrolysis. In this series we a look in the first part at resonant water splitting. Better known as the Stanley Meyer Fuel cell. Not much is available to research beforehand, so we must figure out how it works.
I like to announce the availability of the latest movie in the LENRs series. Here I was already testing various electrolyte solution and came across one which did create exploding bubbles. I then created a new electrolyte and added all camera and monitoring functions, rather then me telling you what I see, as I recorded while I did perform tests.
I like to announce the availability of the latest video in the LENRs series. Since the last time I gathered information which allowed me to adapt to the situation for the process. The general information is available how to do it, but the devil is in the detail which is named nowhere. With my approach I want to make sure
I like to announce the availability of the latest video in the LENRs series. Since the last time I gathered information which allowed me to adapt to the situation for the process. The general information is available how to do it, but the devil is in the detail which is named nowhere. With my approach I want to make sure